mode in white papers
WAN Traffic Management With PowerLink Pro100
White Paper The Pro100 now allows the ability to apply all the benefits of the Internet Traffic Management solutions, such as - WAN link redundancy with automatic failover, bandwidth aggregation for any type of WAN technology, multi-homing, transparent... [11 Jul 2008]
VPN Load Balancing on the CSM in Directed Mode Configuration Example
White Paper This paper provides a sample configuration for VPN load balancing on a Content Switching Module (CSM). VPN load balancing is a mechanism that intelligently distributes VPN sessions along a set of VPN concentrators or VPN head-end devices. [10 Jul 2008]
Cisco IOS Server Load Balancing: Real Server Configuration
White Paper This paper describes the configuration of the real servers used with the Cisco IOS Server Load Balancing (SLB) dispatch mode. The SLB dispatch mode is also known as MAC address-based mode and Loopback address-based mode. [10 Jul 2008]
A Low-Noise Fast-Settling PLL With Extended Loop Bandwidth Enhancement by New Adaptation Technique
White Paper It enables the loop bandwidth in the speed-up mode to greatly exceed the limit of approximately 1/10 of the channel spacing in the integer frequency synthesizer. In the speed-up mode, the loop bandwidth is enhanced by 16 times, resulting in a fast... [10 Jul 2008]
Removing Cell Demultiplexing Performance Bottleneck in ATM Pseudo Wire Emulation Over MPLS Networks
White Paper Cell multiplexing is highly desirable to achieve increased transport efficiency in Asynchronous Transfer Mode (ATM) pseudo wire emulation over a MultiProtocol Label Switching (MPLS) network. Supporting cell multiplexing, however, can create... [10 Jul 2008]
Multi-Protocol Label Switching (MPLS): Using MPLS to Build an Application-Centric Network
White Paper This paper discusses the mechanics of using Multi-Protocol Label Switching (MPLS) to enable highly scalable, intelligent Layer 2 and 3 Quality of Service (QoS), privacy and end-to-end connectivity in either Asynchronous Transfer Mode (ATM) or... [10 Jul 2008]
EtherChannel Between a Cisco Catalyst Switch That Runs Cisco IOS and a Workstation or Server Configuration Example
White Paper One can use EtherChannel to interconnect LAN switches, routers, servers, and clients via Unshielded Twisted Pair (UTP) wiring or single-mode and multimode fiber. EtherChannel allows multiple physical Ethernet links to combine into one logical... [10 Jul 2008]
MPLS Networking for Non-GEO Satellite Constellations
White Paper Connection-oriented approaches like Asynchronous Transfer Mode (ATM) are interesting candidates for dynamic or fixed satellite network topologies as reliable and powerful traffic engineering methods can be applied in network design. [10 Jul 2008]
Understanding EtherChannel Load Balancing and Redundancy on Catalyst Switches
White Paper Fast EtherChannel can be used to interconnect LAN switches, routers, servers, and clients via Unshielded Twisted Pair (UTP) wiring or single-mode and multimode fiber. Fast EtherChannel allows multiple physical Fast Ethernet links to combine into... [10 Jul 2008]
TechNet Webcast: Windows Vista System Integrity Technologies (Level 400)
White Paper Windows Vista provides several new system integrity technologies, including code integrity, secure startup, service hardening, mandatory integrity control, and Internet Explorer protected mode. Every part of an operating system pretty much assumed... [08 Jul 2008]
Amazing Global Improves Operational Efficiency and Business Performance With CRM Solution
White Paper Atlantic Technologies wanted to create a single, global, shared system for pipeline and forecast management - available over the Web in Software-as-a-Service (SaaS) mode and reduce forecast production and consolidation times - decreasing the risk... [05 Jul 2008]
Why Doesn't PIM Sparse Mode Work With a Static Route to an HSRP Address?
White Paper This paper explains why multicast packets are not forwarded when one configures a static route to the Hot Standby Router Protocol (HSRP) address of a Protocol Independent Multicast (PIM) sparse mode neighbor. [03 Jul 2008]
Mixed-mode on Itanium-based Platforms: Why and How
White Paper In the transition from Precision Architecture to the Intel Itanium architecture, it may be necessary to create mixed-mode programs, i.e.programs where a library function written for one architecture must be called by code written for the other... [03 Jul 2008]
Multicast Source Discovery Protocol SA Filter Recommendations
White Paper Multicast Source Discovery Protocol (MSDP) Source-Active (SA) messages contain (source, Group (S,G)) information for Rendezvous Points (RPs) (called MSDP peers) in Protocol Independent Multicast Sparse-Mode (PIM-SM) domains. [03 Jul 2008]
Cisco MWR 1941 Router Redundancy
White Paper The 1:1 redundancy solution requires an active Cisco MWR 1941 to be deployed with a second Cisco MWR 1941 that is connected to the same network but in standby mode. The Cisco MWR 1941-DC-A Mobile Wireless Edge Router can be used either in a... [03 Jul 2008]
Keep updated for stories matching mode in white papers via RSS
